Peak Design Capture with P.O.V Kit
Bảo hộ người mua - Hoàn tiền nếu không nhận được hàng hoặc thiếu hàng
- Bồi thường nếu sản phẩm không đúng theo mô tả
- Trả lại hàng khi sản phẩm không đúng theo mô tả
Mô tả sản phẩm
The Peak Design Capture Camera Clip V2 and POV Kit Bundle is a kit put together by B&H that features the Capture Camera Clip V2 camera holstering system and the POV Kit accessory for it.
The Capture Camera Clip V2 is made of up a clip and a quick release plate, which together can support up to 100 lb. The quick release plate is compatible with all Arca-type clamps. The clip can attach to any backpack strap, bag, or belt less than 3" wide.
The POV Kit hardware attaches to the Capture Camera Clip V2 and allows you to mount a GoPro, low-profile point and shoot, or other small camera. For the GoPro, it features a J-arm mount that allows you to adjust the camera up-and-down and side-to-side using thumbscrews. With this kit, the Capture Camera Clip becomes a complete solution for capturing action shots while on the move. for more information on the item in this kit please follow the links below.
-
Peak Design POV Kit for All Capture Camera Clips
- POV Kit Instructional Video
The POV Kit from Peak Design must be used with any Capture camera clip, turning it into a point-of-view video mount. The kit is made up of three main components: an adapter plate, a J-arm, and a point-and-shoot plate.
The adapter plate locks into your Capture camera clip and has a multi-prong hinge connector that is the attachment point for the J-arm or point-and-shoot plate. The J-arm allows you to attach any GoPro Hero camera and enables the GoPro to be adjusted up-and-down and side-to-side by adjusting the thumb screws. The point-and-shoot plate connects the adapter plate to any slim bodied point-and-shoot camera with a 1/4"-20 tripod thread. It allows you to shoot point-of-view video or carry your point-and-shoot camera in a low-profile manner by folding it flat against your body.
- The point-and-shoot plate has a non-twist pad and a coin/hex drive 1/4"-20 camera mounting screw.
- A small stiffening pad is included that mounts behind your Capture clip to stabilize loose backpack straps.
Thông số kỹ thuật
-
Material Adapter Plate: Glass-Reinforced Nylon
J-Arm: Glass-Reinforced Nylon, Anodized Aluminum, and Stainless Steel
Point-and-Shoot Plate: Glass-Reinforced Nylon, Injection-Molded Rubber, and Steel
POV Connection Screws: Stainless Steel and AluminumCamera Mount Thread Size Point-and-shoot adapter plate: male, 1/4"-20 Dimensions Adapter plate with J-arm attached (largest configuration): 1.5 x 2.2 x 2.0" (38.0 x 57.0 x 51.0 mm) Weight Kit: 1.8 oz (50.0 g) Packaging Info Box Dimensions (LxWxH) 5.7 x 2.9 x 1.7" -
Peak Design Capture Camera Clip V2
Material Glass-reinforced nylon, aluminum Dimensions Clip: 4.1 x 2.1 x 1.1" (10.4 x 5.2 x 2.8 cm)
Plate: 1.5 x 1.5 x 0.5" (38.0 x 38.0 x 13.0 mm)Weight Clip: 3.5 oz (100.0 g)
Plate: 0.8 oz (22.0 g)Packaging Info Box Dimensions (LxWxH) 5.5 x 5.2 x 1.0"
Hình ảnh
