RODE SMARTLAVP ( SmartLav+)

Mã sản phẩm

Giá bán

Bảo hành

RODE SMARTLAVP ( SmartLav+)

1.790.000đ

12 tháng

Mua hàng

Bảo hộ người mua

Hoàn tiền nếu không nhận được hàng hoặc thiếu hàng
Bồi thường nếu sản phẩm không đúng theo mô tả
Trả lại hàng khi sản phẩm không đúng theo mô tả

Hỗ trợ mua hàng

0911 581 581

Liên hệ mua trả góp

0917 581 581

Mô tả sản phẩm

The Rode smartLav+ is a lavalier microphone for your Apple or Android mobile device that is designed to deliver high-quality audio recording. The smartLav+ clips on to your shirt or lapel, and the sensitive, omnidirectional condenser capsule captures the sound equally from all sides of the microphone. This design lends to effective, hands-free recording of speeches, interviews, dictations and more.

The smartLav+ is equipped with a Kevlar-reinforced cable that has been strain tested up to 10kg to help ensure reliable performance. It uses a grey-sleeved TRRS connector to connect into your smartphone or tablet's headphone input and it works with most audio recording apps.

The smartLav+ also features improved sensitivity and higher signal-to-noise ratio over the original smartLav. The package comes with a mic clip with cable management, a foam pop shield and a small carry pouch.

Compatible with iPhone 5S, iPhone 5, iPhone 5C, iPhone 4S, iPhone 4, iPad Air, iPad (3rd generation), iPad 2, iPad mini, iPod touch (4th and 5th generation) & many Android devices. A full list of compatible devices can be found here.

Works with any audio app that records from the headset input

Record, EQ, edit, and publish your audio with Rode Rec App for Apple iOS (not included)

Foam pop shield softens vocal plosives and wind noise

Mic clip with cable management included for neatly securing microphone to clothing

Small pouch included for storage and transport

Combine with SC3 adapter to use with TRS devices

Combine with SC6 dual TRRS input adapter to use two smartLav+ with one smartphone

Thông số kỹ thuật

Rode SmartLav+

Acoustic Principle	Pressure gradient
Active Electronics	JFET
Capsule	0.10" / 2.54 mm
Polar Pattern	Omnidirectional
Address Type	End
Frequency Range	60 Hz to 18 kHz
Output Impedance	3 kOhms Typical
Signal to Noise Ratio	67 dB
Maximum SPL	110 dB SPL (@ 1 kHz, 1% THD into 1 kOhm load)
Maximum Output Level	189.0 dBu (@ 1 kHz, 1% THD into 1 kOhm load)
Sensitivity	-35 dB (17.8 mV @ 94 dB SPL)
Equivalent Noise Level	27 dB-A
Connector	TRRS
Maximum Output	189 mV
Dynamic Range	83 dB typical
Dimensions	46.5 x 0.18 x 0.18" / 1180 x 4.5 x 4.5 mm, mic and cable
Weight	0.211 oz / 6.00 g