Microphone RODE NTG5 Kit
- Hoàn tiền nếu không nhận được hàng hoặc thiếu hàng
- Bồi thường nếu sản phẩm không đúng theo mô tả
- Trả lại hàng khi sản phẩm không đúng theo mô tả
Mô tả sản phẩm
Shorter and lighter than the NTG3 and with a flatter bass response, the Rode NTG5 moisture-resistant shotgun microphone lets you capture natural, uncolored sound indoors or outside for your next indie film, TV shoot, or documentary project without weighing down your rig.
Professional-level features such as ultralow-noise circuitry, a smooth off-axis response, and a tightly controlled low end make it ideal for a range of location recording scenarios. Plus, it includes a furry windshield and a pistol grip shockmount that can be attached to a boompole for increased versatility.
The NTG5's extremely high sensitivity allows it to produce robust output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG5 delivers acoustic transparency due to its pioneering circular acoustic ports, gentle rise in high frequencies, and rumble-reducing attenuation of low bass frequencies. Its switch- and dial-free design lets you set up quickly and focus on the sound instead of fiddling with various mic settings. RF-bias technology and conformal coating ensure reliable performance even in severe conditions.
Designed to Withstand Adverse Environmental Conditions
Broadcast-Quality Sound
Phantom Powered
Ideal for Handheld Operation or Boompole Mounting
Windshield and Windscreen for Reduction of Wind Noise
Thông số kỹ thuật
Rode NTG5 Specs
Form Factor | Stand/Boom Mount |
Sound Field | Mono |
Operating Principle | Line Gradient |
Capsule | Condenser |
Polar Pattern | Supercardioid |
Orientation | End Address |
Circuitry | Solid-State |
Pad | None |
High-Pass Filter | None |
Tone Adjustment | None |
Indicators | None |
On-Board Controls | None |
Windscreen | Foam, Windsock/Windjammer (Included) |
Frequency Range | 20 Hz to 20 kHz 80 Hz to 20 kHz ±3 dB |
Maximum SPL | 130 dB SPL |
Off-Axis Rejection | 4 dB at 60° 20 dB at 120° 24 dB at 180° |
Impedance | 25 Ohms |
Sensitivity | -23.5 dBV/Pa at 1 kHz |
Signal-to-Noise Ratio | 84 dB |
Equivalent Noise Level | 10 dB A-Weighted |
Output Connectors (Analog) | 1 x XLR 3-Pin Male (on Mic) |
Wireless Connectivity | None |
Operating Voltage | 48 V |
Operating Current Consumption | 2 mA |
Color | Black |
Mounting | Mic Clip, Shockmount (with Included Hardware) |
Construction Material | Aluminum |
Dimensions | ø: 0.75 x L: 7.99" / ø: 19 x L: 203 mm (Microphone) H: 9.45 x W: 2.36 x L: 4.61" / H: 240 x W: 60 x L: 117 mm (Mount) |
Weight | 2.68 oz / 76 g (Microphone) 7.9 oz / 224 g (Mount) |
Package Weight | 2.15 lb |
Box Dimensions (LxWxH) | 9.7 x 9.4 x 3.4" |